Direct Answer: Under European pressure casting standard EN 10213, 1.0619 (GP240GH, formerly DIN GS-C25) is the unalloyed carbon steel pressure grade equivalent to ASTM A216 WCB, while 1.4408 (GX5CrNiMo19-11-2) and 1.4308 (GX5CrNi19-10) are the austenitic stainless steel equivalents of ASTM A351 CF8M and CF8. Because EN 10213 enforces stricter carbon and Charpy V-notch impact rules than base ASTM standards, heats must be melted to the overlapping “sweet-spot” chemistry window to achieve dual ASTM + EN 10213 certification on a single EN 10204 3.1 MTR.
Direct Foundry & CNC Manufacturing — Pingdu, Qingdao
Qingdao Yucheng Machine (YCUMETAL) operates a 34,000 m² integrated casting and CNC machining facility in Pingdu, Qingdao (approx. 50 km from Qingdao Port). We pour and finish-machine stainless steel, carbon & alloy steel, ductile/grey iron, aluminum, and copper/bronze alloys across silica-sol investment casting, sand casting, lost foam, gravity, and low-pressure casting.
✓ IATF 16949 & ISO 9001 Certified | ✓ EN 10204 3.1 MTR + Spectrometer, Industrial CT & CMM Inspection | ✓ 24h Engineering DFM & Quote
1. Overlapping Dual-Certification Window: EN 1.0619 (GP240GH) vs ASTM A216 WCB
Global valve and pump OEMs hate stocking separate raw castings for North American ASME B16.34 and European EN 1092-1 / PED markets. Compare the exact requirements of 1.0619 (GP240GH) and ASTM A216 WCB and how YCUMETAL pours a single dual-compliant melt:
| Parameter | EN 10213 1.0619 (GP240GH / GS-C25) | ASTM A216 Grade WCB | YCUMETAL Dual-Certified Target Window |
|---|---|---|---|
| Carbon (C) wt.% | 0.18 – 0.23% | ≤ 0.30% | 0.18 – 0.22% |
| Manganese (Mn) & Silicon (Si) | Mn 0.50–1.20%, Si ≤0.60% | Mn ≤1.00% (up to 1.28% if C reduced), Si ≤0.60% | Mn 0.75 – 1.00%, Si 0.30 – 0.55% |
| Phosphorus (P) & Sulfur (S) | P ≤0.030%, S ≤0.020% | P ≤0.040%, S ≤0.045% | P ≤0.025%, S ≤0.015% |
| Tensile Strength (Rm) | 420 – 600 MPa | 485 – 655 MPa | 490 – 595 MPa |
| Yield Strength & Elongation | Rp0.2 ≥ 240 MPa, A ≥ 22% | Yield ≥ 250 MPa, A ≥ 22% | Yield ≥ 265 MPa, Elongation ≥ 24% |
| Charpy V-Notch Impact (KV) | ≥ 27 J at +20 °C (mandatory) | Optional under S9 | ≥ 40 J at +20 °C (tested on every heat) |
2. Overlapping Dual-Certification Window: EN 1.4408 vs ASTM A351 CF8M & CF3M
Similarly, EN 10213 1.4408 (GX5CrNiMo19-11-2) caps carbon at ≤ 0.07% (vs ≤ 0.08% in CF8M and ≤ 0.03% in CF3M), requires 18.0–20.0% Cr (overlapping CF8M’s 18.0–21.0%), 9.0–12.0% Ni, and 2.0–2.5% Mo (overlapping CF8M’s 2.0–3.0%), plus mandatory room-temperature impact toughness of ≥ 60 J. By melting to C ≤ 0.03% (or ≤ 0.06%), Cr ≈ 18.5–19.8%, Ni ≈ 9.5–11.0%, and Mo ≈ 2.1–2.45%, YCUMETAL’s Pingdu foundry delivers investment and sand castings dual-stamped CF8M / 1.4408 (or quad-stamped CF8M / CF3M / 1.4408 / 1.4409). See our full international casting grade cross-reference chart or request a dual-certified quotation.
Frequently Asked Questions (Engineering FAQ)
Ferrous & Stainless Foundry Metallurgy, ISO 8062-3 Tolerances & NDT Quality Assurance
In industrial B2B sourcing for EN 10213 Pressure Steel Castings: 1.0619 (GP240GH) vs WCB & 1.4408 vs CF8M Dual-Certification Guide, long-term supply-chain stability depends on locking chemical composition windows, solidification feeding paths, and non-destructive testing (NDT) acceptance criteria prior to pattern or wax-die fabrication. At YCUMETAL’s 34,000 m² Pingdu foundry, medium-frequency induction melting is paired with optical emission spectrometry (OES) on every heat before ladle transfer. Whether producing thin-walled silica sol investment castings (0.05–15 kg, CT5–CT6) or heavy resin-sand / lost-foam ductile iron and cast steel housings (5–2,000 kg, CT7–CT9), 3D solidification simulation eliminates hot tears and shrinkage cavities in critical load-bearing fillets.
| Material / Process Specification | Applicable Standard & Production Route | Mechanical / Dimensional Capability | Quality Verification & Deliverable |
|---|---|---|---|
| Silica Sol Investment Casting (Lost Wax) | ASTM A351 CF8/CF8M, A216 WCB, 17-4PH, 42CrMo4 | ISO 8062-3 CT5–CT6 (±0.15–0.35 mm) | Ra 3.2 μm | EN 10204 3.1 MTC + Spectro + CMM + PT/MT/RT |
| Furan Resin Sand & Shell Mold Casting | ASTM A536 (GGG40/50), A48 (GG25), A352 LCB/LCC | ISO 8062-3 CT7–CT9 (±0.50–1.20 mm) | Ra 12.5 μm | Nodularity ≥85% metallography + ultrasonic ASTM A609 |
| Lost Foam & Automated Green Sand Molding | EN-GJS-400-15, EN-GJS-500-7, EN-GJL-250, SiMo Iron | ISO 8062-3 CT7–CT8 | Zero parting-line flash (Lost Foam) | PPAP Level 3 + Gage R&R + 4-axis CNC datum machining |
B2B Cost Drivers, Tooling Amortization, Low-MOQ Prototyping & RFQ Checklist
When comparing quotes across custom metal casting and CNC machining manufacturers, unit piece price alone rarely reflects total landed cost. Engineering and purchasing teams evaluating EN 10213 Pressure Steel Castings: 1.0619 (GP240GH) vs WCB & 1.4408 vs CF8M Dual-Certification Guide optimize total cost of ownership (TCO) across four operational levers:
- 1. Rapid Prototyping vs. Hard Tooling Break-Even Analysis: For pilot validation runs of 5 to 50 pieces, 3D-printed PMMA/SLA wax patterns (for investment casting) or CNC-machined resin-sand / hog-out billets eliminate $1,500–$4,500 in initial permanent tooling investment and compress T1 sample delivery to 10–14 calendar days. Once annual volume exceeds 150–300 pieces, dedicated aluminum wax dies, metal shell patterns, or H13 steel permanent molds amortize within the first production batch while cutting unit casting cost by 35–55%.
- 2. Near-Net-Shape Coring to Eliminate Secondary CNC Cycle Time: Every millimeter of excess machining stock adds spindle minutes, insert wear, and chip waste. By designing soluble/ceramic cores or precision shell cores into internal fluid passages, clevis slots, and weight-saver pockets, required machining allowance (RMA) is restricted strictly to functional sealing faces, H7 bearing bores, and threaded ports.
- 3. Heat-Lot Traceability & Defect Containment (Zero-Defect Gateways): Each production batch is tracked via a unique heat/pour barcode from raw charge make-up through spectrometer chemistry verification, T6/normalizing heat-treatment furnace charts, shot-blasting, CNC probing, and pressure leak testing. Full EN 10204 3.1 mill certificates and ballooned CMM dimensional reports accompany every shipment.
- 4. Export Packaging & Sea/Air Freight Corrosion Prevention: Machined ferrous and aluminum surfaces are protected with vapour-phase corrosion inhibitor (VCI) film, desiccant packs, and custom-slotted ISPM-15 fumigation-free plywood crates engineered to withstand 45-day ocean transit without fretting or surface oxidation.
What to Include in Your Technical RFQ Package: To receive a comprehensive DFM review and itemized tooling + piece-price breakdown within 24 hours from Qingdao Yucheng’s engineering team, please provide: (1) 3D CAD model (STEP / IGES / Parasolid) + 2D PDF drawing with GD&T tolerances; (2) target material grade (ASTM / EN / DIN / JIS / GB); (3) estimated batch quantity and annual usage (EAU); (4) required surface finish or coating specification; and (5) any special NDT (X-ray, UT, MT, PT, pressure test) or PPAP documentation requirements.
Can every ASTM A216 WCB casting be certified as EN 10213 1.0619 (GP240GH)?
Only if the ladle chemistry and tensile results fall within the overlapping window: carbon must be between 0.18% and 0.23% (WCB allows up to 0.30% and no minimum), sulfur must be ≤0.020%, tensile strength must be between 485 MPa and 600 MPa (since 1.0619 caps tensile at 600 MPa while WCB requires ≥485 MPa), and Charpy V-notch impact energy of ≥27 J at +20 °C must be verified.
What is the difference between 1.4408 and 1.4409 in EN 10213?
1.4408 (GX5CrNiMo19-11-2) has a maximum carbon limit of 0.07% (equivalent to ASTM CF8M / 316), whereas 1.4409 (GX2CrNiMo19-11-2) restricts carbon to ≤0.030% (equivalent to ASTM CF3M / 316L) to prevent intergranular carbide sensitization during welding without post-weld solution treatment.
What is the old DIN designation for EN 1.0619 (GP240GH)?
Before EN 10213 replaced DIN 17245, material 1.0619 was designated as GS-C25. Both designations still appear frequently on German and European valve and machinery drawings.
Related Casting & CNC Engineering Guides (Martensitic, Austenitic, Duplex & PH Stainless Steel Castings (CF8M / CF8 / CA15 / CA6NM / 17-4PH))
Core Process & Industry Hubs: Stainless Steel Investment Casting Line • Medical & Food-Grade Stainless Castings • CA15 vs CA6NM Martensitic Stainless Steel Castings (ASTM A217 / A487 / A743): Properties, Heat Treatment & Selection • ASTM / EN / JIS / GB Grade Cross-Reference Tool • ISO 8062 CT4–CT12 Tolerance Chart
- CA15 vs CA6NM Martensitic Stainless Steel Castings (ASTM A217 / A487 / A743): Properties, Heat Treatment & Selection
- Stainless Steel Casting vs Machining: How OEM Buyers Choose for Corrosion Resistance and Precision
- CD4MCu Duplex Stainless Castings: Strength Plus Chloride Resistance
- Low Alloy Steel Castings: 42CrMo, 8620 and the Grades Between Carbon and Stainless
- CN7M (Alloy 20) Castings: The Sulfuric Acid Specialist
- CF8M Material: The Cast 316 Stainless Steel Grade Explained
Latest 2026 Foundry & CNC Engineering Technical Guides
- CA15 vs CA6NM Martensitic Stainless Steel Castings (ASTM A217 / A487 / A743): Properties, Heat Treatment & Selection
- ISO 8062 Casting Tolerance Grades (CT4 to CT12): Investment Casting vs Sand Casting Dimensional & RMA Chart
- Top Investment Casting Manufacturers: How to Audit Silica Sol Foundries & Turnkey CNC Suppliers
- EN 10204 3.1 vs 3.2 Material Certificates for Metal Castings: MTR, Heat Traceability & PED Guide
- Bronze & Copper Casting Alloys Guide: C95400 & C95800 Aluminum Bronze vs C83600 & C93200 (SAE 660)
- ADC12 vs A380 vs A356 Aluminum Casting Alloys: Composition, T6 Strength & Process Selection
- ASTM A743 vs ASTM A351 Stainless Steel Castings: CF8, CF8M, CG8M, CA15 & CA6NM Differences
- ASTM A148 High-Strength Structural Steel Castings: Grades 80-50, 90-60, 105-85 & 120-95 Guide
- GGG40 vs GGG50 Ductile Iron (EN-GJS-400-15 vs EN-GJS-500-7): ASTM A536 Equivalents & Matrix Guide
- ASTM A217 Alloy Steel Castings: WC6, WC9, C5, C12 & C12A High-Temperature Valve & Turbine Grades
- ASTM A352 Low-Temperature Steel Castings: LCB vs LCC vs LC1, LC2 & LC3 (-46°C to -101°C Guide)
- ASTM A890 & A995 Duplex Stainless Castings: 4A (2205) vs 1B (CD4MCuN) vs 5A (2507 Super Duplex)
- EN 10213 Pressure Steel Castings: 1.0619 (GP240GH) vs WCB & 1.4408 vs CF8M Dual-Certification Guide
- ASTM A128 Austenitic Manganese Steel Castings (Hadfield 11–14% Mn / ZGMn13): Work-Hardening Wear Guide
- Specialty Non-Ferrous Castings: AZ91D / AM60B Magnesium Alloys & CW12MW / Inconel Nickel Superalloys
- Silica Sol vs Water Glass Investment Casting: Surface Finish (Ra), CT5–CT7 Tolerances & Cost Guide
- Pump Impeller & Valve Body Castings (Ball, Gate, Check, Butterfly): Ceramic Core, CT Scan & Alloy Guide
- Automotive & Robotics Precision Castings: SiMo Exhaust Manifolds, Steering Knuckles & Robotic Arm Housings
- Casting Materials & Alloy Specifications Archive
- Latest Foundry & CNC Engineering News
