Precision Castings for Automation and Motion Systems
Automation hardware is a stiffness and repeatability problem before it is a strength problem. A robot base or a linear axis mount fails its specification not by breaking but by flexing a fraction of a millimetre under acceleration, so section design and material damping matter more than headline tensile numbers. Gray iron still wins on machine bases because nothing else damps vibration as cheaply; aluminium takes over where moving mass carries a cycle-time penalty. Bearing bores and mounting faces are machined in-house from cast datum targets agreed at the drawing stage, which is what keeps alignment repeatable batch after batch.
Typical Automation Components
- Machine bases, frames and mounting plates
- Servo gearbox and reducer housings
- Linear guide seats and axis brackets
- Fixture bodies and tooling bases
- Pneumatic cylinder end caps and manifolds
- Conveyor drive housings and idler bodies
Why Choose Us
Automation hardware is judged on repeatability at the tool point. Datum targets are agreed at the drawing stage, coaxial bores are line-bored in one setup wherever geometry allows, and CMM layouts verify position against the same references every batch.
01
High Quality Parts
We implement digital precision control throughout the entire process, combining micron-level inspection and traceability systems with a professional team to ensure exceptional product performance, safety, and durability, meeting complex requirements. Our manufacturing capabilities are also adaptable to the intricate designs required for custom part production.
02
Fast Lead Time
With quotes within minutes and parts within days, you can reduce cycle times by up to 50% with Ycumetal. A perfect combination of advanced technologies and extensive technical experience helps us deliver superior-quality aerospace parts with faster lead times.
03
Engineering Support
As a manufacturing company certified by ISO 9001, Ycumetal’s production line adopts advanced technology to ensure the accuracy and precision of manufacturing. Each product has the correct size specifications, structural strength, and performance.
We Help From Prototyping to Production
01
Prototyping
We offer high-precision prototype manufacturing services to support early-stage product development. Our services include design parameter validation and material iteration optimization, developing test prototypes based on product specifications. By utilizing cost-effective manufacturing methods and selecting the best material solutions, we ensure the prototypes meet testing requirements while maintaining the expected performance of the final product.
- Material Selection and Design Iteration
- Detailed Prototypes for Complex Products
- Models Close to Final Product Specifications
03
Design Validation and Testing
Using multiple material options and surface treatments, we efficiently verify the functionality, performance, and appearance of components. During the production phase, we provide analysis of the final product’s appearance. At Ycumetal, we offer professional and comprehensive mechanical design solutions, materials, and surface treatments to meet your unique requirements.
- Production of High-Quality Products
- Validation of Functionality, Performance, and Appearance
- Enhanced Durability and Optimized Surface Finishes
05
Mass Production
From product design to large-scale production, we ensure strict adherence to quality standards and timely delivery of the final product. With over 20 years of engineering expertise and advanced manufacturing processes, we take full responsibility for your product’s production. Our skilled technicians ensure high production yield and exceptional quality, balancing cost efficiency with on-time delivery.
- High-Quality Mass Production
- Strict Tolerance Requirements for Precision Components
- Secondary Processing to Meet Advanced Surface Quality Standards
- Rigorous Product and Quality Control Requirements
02
Engineering Validation & Testing
We create accurate product prototypes with rapid iteration to ensure all performance designs are met. Our prototypes help identify design risks and reduce potential issues. Iterative testing may be required to ensure the product fulfills all functional requirements and performance criteria.
- Precision Component Manufacturing
- Experienced Design and Engineering Support
- Material Optimization for Customized Products
04
Production Validation and Testing
Using state-of-the-art manufacturing capabilities and quality control measures, we ensure full readiness for production. Final adjustments to the design are made for more efficient manufacturing, resulting in a flawless final product.
- Rapid Delivery of Product Parts
- Validation of the Manufacturing Process
- Verification of Component Functionality During Production
Our Manufacturing Capabilities
Ycumetal provides a range of manufacturing capabilities to support rapid prototyping and both low and high-volume production needs. With our own factory and a reliable Chinese network, we deliver complex, high-quality parts efficiently.
lost foam casting
Produces complex hollow structures without traditional mold-making processes, featuring high material utilization rates.
- Tolerances as precise as ±0.02 inches (0.5 mm).
- Thin wall thickness achievable down to 0.04 inches (1 mm).
- Lead times starting from 5 days.
lost wax casting
High-precision metal casting with exceptional detail reproduction, compatible with materials such as stainless steel and copper alloys.
- Tolerances as tight as ±0.004 inches (0.1 mm)
- Wall thickness as thin as 0.012 inches (0.3 mm)
- Delivery time starting from 10 days
Low-Pressure Casting
Driven by air pressure for smooth metal liquid filling, precision aluminum/magnesium/copper components, and complex thin-wall structures in one-piece molding.
- Material utilization rate >95%
- Tolerance: ±0.02 inches (0.5 mm)
- Wall thickness as thin as 0.08 inches (2 mm)
sand casting
Cost-effective batch production of cast iron and aluminum parts, supporting large-sized components.
- Tolerances as tight as ±0.06 inches (1.5 mm)
- Wall thickness as thin as 0.12 inches (3 mm)
- Delivery time starting from 7 days
Gravity Casting
Aluminum and zinc alloy casting with natural metal flow filling, reducing internal defects and offering excellent mechanical properties.
- Tolerances as tight as ±0.012 inches (0.3 mm)
- Wall thickness as thin as 0.08 inches (2 mm)
- Delivery time starting from 5 days
CNC&LATHE processing
High precision machining products, with three-axis, four axis, and five axis to achieve rapid delivery of products.
- Accuracy up to ±0.0004 inches (0.01 mm)
- Rapid prototyping with delivery starting from 1 day
surface treatment
Enhances wear and corrosion resistance with a variety of texture options.
- Coating uniformity up to ±0.0004 inches (0.01 mm)
- Parts delivered in as fast as 1 day
- 20% off or more affordable pricing
welding
Steel, aluminum, titanium, and other multi-material high-strength connections, flexibly adapting to complex requirements.
- Weld seam precision up to ±0.008 inches (0.2 mm)
- Minimum weld spot diameter of 0.02 inches (0.5 mm)
- Delivery time starting from 1 day